PROGRAMMING
Precaution
Before programming the system data for D
following status.
• The system is under On-Line mode ("RUN" lamp is flashing on the MP card)
• The AP00 card is mounted in the correct location.
• All the system data pertaining to stations, trunks, and service features are already assigned.
Station Number Data Loading
The AP00 stores the station number data loaded from the MP. When station numbers have been
added, deleted or changed by CM10, the station number data must be reloaded to the AP00 by
the following procedure.
(1) Flip the MB switch of the AP to UP position.
(2) Return the MB switch to DOWN position.
(3) The "**** AP00 START ****" message is printed on the TIMS printer.
(4) The "SORT COMPLETE" message is printed when the station number has been sent to the
AP.
CALL INFORMATION SYSTEM (CIS)
term
TIMS, confirm that the system data is under the
– 107 –
PROGRAMMING
Precaution/Station Number Data Loading
A2107-10