NEC NEAX 2000 Programming Manual page 447

The associated access codes are preassigned as shown below, and cannot be changed.
On Busy Tone Connection
1. None
2. Call Back/Outgoing Queuing
3. Executive Right of Way
4. Station Camp-On
5. Call Waiting
6. Message Reminder Set
7. Step Call (7 + Last one digit)
8. Message Record
9. None
This feature cannot be set from Attendant Console.
NOTE 1:
This feature cannot be set from a station having a held call.
NOTE 2:
This feature can be set only from a station having a held incoming call.
NOTE 3:
From a DTMF telephone, a hooking operation is required before dialing the single digit
NOTE 4:
access code.
This feature is mutually exclusive with Step Call.
However, 2 digit dialing Step Call can be provided by using this feature.
NOTE 1, 2
NOTE 1, 2
NOTE 3
– 427 –
SINGLE DIGIT FEATURE ACCESS CODE
On Ring Back Tone Connection
1. Voice Ring changeover
2. Call Back-Don't Answer
3. None
4. None
5. None
6. Message Reminder Set
7. None
8. Message Record
NOTE 4
9. None
NOTE 4
NOTE 1, 2, 4
NOTE 4
A2425-10