NEC NEAX 2000 Programming Manual page 208

C
CM08
Specify the memory area to be used for
Speed Calling-System when using Dial By
Name for Speed Calling-System (1000-
Slot Memory).
Assign the number to be dialed to each
CM74
Memory Slot number, if required. The
numbers to be called are usually set from
individual stations by their station users.
D
DESCRIPTION
– 188 –
DIAL BY NAME-D
DATA
(1) 112: 1000-Slot Memory Block No. 0
(2) 0 : Available
1 : Not available
(1) 111: 1000-Slot Memory Block No. 1
(2) 0 : Available
1 : Not available
(1) 176: 1000-Slot Memory Block No. 2
(2) 0 : Available
1 : Not available
(1) 110: 1000-Slot Memory Block No. 3
(2) 0 : Available
1 : Not available
Y=0
•
(1) X YY Z
X : 0-3 (Basic), 4-9 (Option):
1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
(2) Stored No.:
Outgoing Call Access Code (Max. 4
,
digits) + + Stored No. (Max. 32 dig-
its)
To set a pause into the Stored No., en-
ter "C" (Fixed Pause=1.5 sec.) or "D"
(Programmable Pause specified by
CM41 Y=0>38) after desired digits.
term
A2179-10