NEC NEAX 2000 Programming Manual page 464

A
CM94
Allocate the memory area for Speed Call-
ing-One Touch-D
The memory block for storing one called
number of Speed Calling-One Touch-D
is called a "Memory Parcel".
An assembly of 10 Memory Parcels is
called a "10-Slot Memory Block," and one
hundred 10-Slot Memory Blocks are
called a "1000-Slot Memory Block".
Speed Calling-Station by dial access and by D
NOTE 1:
mon memory area. Be sure to allocate the difference memory area by CM94 from
the memory area set by CM73.
1000-Slot Memory Block number 4-9 can be used when the Expansion Memory
NOTE 2:
card (PZ-M537) is mounted on the MP card.
If the station is assigned to One Touch keys using this memory area, the lamp does
not show the busy state.
END
DESCRIPTION
term
to each station.
10-Slot
Memory Parcel Memory Block
0 00
1 01
9 99
– 444 –
SPEED CALLING-ONE TOUCH-D
(1) X-XXXXXXXX: My Line No.
(2) W XX 0 ZZ
W : 0-3 (Basic), 4-9 (Option): 1000-
Slot Memory Block No.
term
XX: 00-99: Memory Slot Block No.
ZZ: 01/02: Number of 10-Slot Memory
Blocks (10 memories/20 memo-
ries)
term
One Touch keys uses the com-
1000-Slot
Memory Block
0
Basic 4000 Memory Parcels
3
4
Option 6000 Memory Parcels
9
DATA
(10-Slot Memory Block)
A2437-10
term