NEC NEAX 2000 Programming Manual page 938

(6/6)
DIRECT STATION SELECTION (DSS) CONSOLE (CONT'D)
GENERAL DESCRIPTION
This feature allows a DSS CONSOLE associated with a D
ANSWER (WU) CONSOLE. This feature is activated by a function mode key on a DSS CONSOLE. The
No Answer status for each station is indicated by a flashing green LED associated with each key.
STATION APPLICATION
term
All D s
OPERATING PROCEDURE
To display and cancel WAKE UP NO ANSWER:
1. Depress the WU key. If stations failed to answer their wake up call, their associated LED flashes
green at 30 ipm.
2. Depress the Function Mode key: an LED associated with the Function Mode key will light red.
3. Depress the flashing DSS key(s) to turn out the desired station's LED.
4. Depress the WU key again to return to the DSS mode, if desired.
SERVICE CONDITIONS
1. The WAKE UP NO ANSWER CONSOLE is only used to display/cancel the No Answer status of the
AUTOMATIC WAKE UP feature after the station has failed to answer. The AUTOMATIC WAKE UP
feature cannot be set from the WAKE UP NO ANSWER CONSOLE.
2. If the system is initialized (reset), the Console function mode will return to DSS.
3. Refer to the DSS CONSOLE and the AUTOMATIC WAKE UP Features and Specifications for more
details.
Page 156
Revision 1.0
WAKE UP NO ANSWER CONSOLE
ND-91285-001(E)
DECEMBER, 1999
term
to be used as a WAKE UP NO