Direct Data Entry; Direct Digital Interface; Direct Inward Dialing (Did); Did Call Waiting - NEC NEAX2000 IVS2 General Description Manual

Direct Data Entry

Direct Data Entry

Direct Digital Interface

Direct Inward Dialing (DID)

DID Call Waiting

DID Digit
Conversion

Direct Inward System Access (DISA)

Direct Inward Termination (DIT)

Direct Outward Dialing (DOD)

Page 52
This feature allows a maid or other hotel personnel to enter numeric data to the
Property Management System (PMS), using the guest room station for entry through
dial operation. The same numerical data can be output to a Hotel/Motel Printer by
system data programming.
This service feature provides the capability to connect trunks from the NEAX2000
2
IVS directly to T1 carrier links using either a private or public network.
This feature provides for incoming calls from the exchange network (except FX or
WATS) to reach any station within the system without attendant assistance.
This feature allows an incoming call on a DID trunk or a tie line to automatically be
Camped-On to the destination station if the destination station is busy.
This feature allows the NEAX2000 IVS
serving C.O. to valid station numbers when the C.O. numbering plan differs from the
desired station numbering plan.
This feature allows an outside caller to access the system using an exchange network
connection without Attendant or station assistance. The outside user may originate
calls over any or all of the system's facilities such as WATS, FX, Tie Line or CCSA.
The outside user can also directly call stations and access miscellaneous trunks for
such features as dictation access.
This feature automatically routes incoming network exchange calls directly to a
pre-selected station without Attendant assistance. The call can then be processed by
the called party. Three-party Conference, Call Transfer, etc., are handled in the same
manner as any normal trunk call.
This feature permits any station user the ability to gain access to the exchange network
by dialing an access code and receiving new dial tone. The user may then proceed to
dial the desired exchange network number.
Chapter 5 Feature Description
2
to convert the digits received from the
2
NEAX2000 IVS General Description
NDA-24293, Issue 2