Remote Access To System - NEC NEAX 2000 Programming Manual

REMOTE ACCESS TO SYSTEM

PROGRAMMING
There are two kinds of processor for Remote Access to System code. One is MP card, the other
is AP01 card.
For MP card, EXPMEM can be used to expand the number of codes.
(1) With MP card
START
CM08
Designate the processor for checking the
ID code for Remote Access to System as
MP card.
Assign the ring cadence on a Remote Ac-
cess to System.
Assign the ID Code Development number
CM2A
for Remote Access to System.
Assign the ID Code for Remote Access to
System.
A
DESCRIPTION
REMOTE ACCESS TO SYSTEM
(1) 217
(2) 0: MP card
(1) 180
(2) 0 : As per CM08>392-Pattern2
1 : As per CM35 Y=33
Y=A0
•
(1) 2
(2) 0-9: ID Code Development No. 00-09
NOTE:
Y=00-09
•
ID Code Development No. 00-09
(1) X-XX...XX (Max. 16 digits):
ID Code for Remote Access to System
(2) 0000-2999: ID Code Pattern No.
– 404 –
DATA
CM2A Y=00-09 is determined
by this data.
A2397-10