NEC NEAX 2000 Programming Manual page 508

A
CM41
Specify the timing of SMDR valid call timer
(pseudo-answer timer).
CMD000 Specify the contents of the detail call infor-
mation to be sent to the SMDR.
Specify the Advice of Charge (AOC).
[Australia Only]
Specify whether ISDN call charge informa-
tion is sent to the SMDR terminal.
[Australia Only]
Specify whether call start year and call
end year are sent to the SMDR terminal.
[Australia Only]
Specify the condition code 1/2 for Advice
of charge in SMDR NEAX2400 IMS For-
mat.
[Australia Only]
CM42 Specify the measured rate.
Use first data: 69 for dollar/franc, and use
first data: 70 for cent/centime.
By this setting, the call charge is calculat-
ed according to the message rate sent
from the network, and is sent to the SMDR
terminal (NEAX2400 IMS Format, charac-
ter 118-124) as AOC, when CMD000>68
is sent to "1".
[Australia Only]
B
DESCRIPTION
STATION MESSAGE DETAIL RECORDING (SMDR)
Y=0
•
(1) 03
(2) 00-08: 8 sec.-40 sec.
(4 sec. increments)
If no data is set, the default setting is
20-24 sec.
(1) 60
(2) 0 : Only the called party's No. is sent
1 : Access Code is sent with the
called party's No.
(1) 176
(2) 0 : No
1 : Yes
(1) 68
(2) 0 : Not sent
1 : To send
(1) 238
(2) 0 : Not sent
1 : To send
(1) 276
(2) 0 : Condition Code 1 is 1 cent unit.
Condition Code 2 is 0. 1 cent unit.
1 : Condition Code 1 is 0. 1 cent unit.
Condition Code 2 is 1 cent unit.
(1) 69 (dollar/franc)
(2) 00-99: 00-99 dollars/franc
(1) 70 (cent/centimes)
(2) 00-99: 00-99 cents/centimes
– 488 –
PROGRAMMING
SMDR with AP00 Programming
DATA
A2486-10