Trunk Group Busy Display - NEC NEAX 2000 Programming Manual

TRUNK GROUP BUSY DISPLAY

PROGRAMMING
START
CM30 Assign the trunk group number to each
trunk.
Several trunks may be assigned to one
trunk group number.
For providing the Trunk Group Busy
CM90
Lamps on ATTCON, assign the trunk
group number to required key.
Max. 6 keys per ATTCON can be
NOTE 1:
assigned. Any six trunk group
number out of trunk group num-
ber 01-62 can be assigned.
Key number 1-6 should not be
NOTE 2:
assigned to provide a Trunk
Group Busy Lamp.
CM44 For providing external Trunk Group Busy
Lamp assign the Trunk Group number to
the required circuit number on the DK
card.
END
HARDWARE REQUIRED
To provide the Trunk Group Busy Lamps on ATTCON:
ATTCON and DLC card
To provide the Trunk Group Busy Lamps externally:
DK card or MP card (built-in DK) and lamp indicator provided by customer
DESCRIPTION
TRUNK GROUP BUSY DISPLAY
Y=09
•
(1) 000-255: Trunk No.
(2) 01-62: Trunk Group No.
Y=00
•
(1) ATTCON No. (E000-E007) +
No.
(2) F12 XX
XX: 01-62: Trunk Group No. assigned
(1) XX Y
XX : 00-31: DK Card No. assigned by
Y : 0-3: Circuit No.
313: MP built-in External Equipment In-
terface
(2) 11 XX
XX: 01-62: Trunk Group No. assigned
– 536 –
DATA
,
+ Key
by CM30 Y=09
CM10 (E800-E831)
by CM30 Y=09
A2536-10