(2/2)
CHOICE OF NIGHT SERVICE (CONT'D)
OPERATING PROCEDURE (CONT'D)
Note: The following shows the terminating method codes
02 :
Trunk Line Appearance or D
03 :
Answer key on D
04 :
Direct-In Termination
09 :
Automated Attendant
13 :
TAS
14 :
Attendant
SERVICE CONDITIONS
1. Incoming C.O. terminating method can be changed every one C.O. Trunk.
2. Changing incoming C.O. terminating method is only valid when Attendant Console is idle.
If an incoming C.O. call appears on Attendant Console while changing incoming C.O. terminating
method, the incoming C.O. call is being queued on Call Waiting.
3. It is not possible to change incoming C.O. terminating method from plural Attendant Console at the
same time.
4. Changing incoming terminating method to available even during NIGHT key is depressed.
Page 116
Revision 1.0
term
term
ND-91285-001(E)
DECEMBER, 1999