NEC NEAX 2000 Programming Manual page 187

A
CM72
Set the stored number to Memory Slot
number allocated by CM71, as needed.
Assign the name for display, to the Memo-
ry Slot number allocated by CM71, by
character codes or character.
Specify the Speed Calling-System securi-
CM08
ty. (Stored number displays on D
outgoing call by Speed Calling-System.)
Specify the Toll Restriction for an outgoing
call by Speed Calling-System.
END
HARDWARE REQUIRED
term
D and DLC card if required
DESCRIPTION
term
CONSECUTIVE SPEED CALLING
Y=0
•
(1) 000-299: Memory Slot No.
(2) Stored No.:
Outgoing Access Code (Max. 4 digits)
,
+ + Stored No. (Max. 26 digits)
To set a pause into the Stored No., en-
ter "C" (Fixed pause=1.5 sec) or "D"
(Programmable pause specified by
CM41 Y=0>38) after desired digits.
Y=1
•
(1) 000-299: Memory Slot No.
(2) XX...XX: Station Name Character
See APPENDIX B: CHARACTER
CODE TABLE.
Y=2
•
(1) 000-299: Memory Slot No.
(2) XX...XX: Station Name Character by
(1) 043
for an (2) 0 : Not displayed
1 : To display
(1) 044
(2) 0 : Not provided
1 : To provide
– 167 –
DATA
Code
(Max. 32 digits, 16 characters)
MAT/CAT
(Max. 16 characters)
A2157-10