NEC NEAX 2000 Programming Manual page 377

A
Enter the desired station user's name to
CM77
each station number by CM77 Y=0 or
CM77 Y=1.
Assign the desired trunk name to each
trunk route by CM77 Y=2 or CM77 Y=3.
END
The maximum number of stations that can be provided with the user's name display is
NOTE 1:
512. The maximum number of characters per name is eight, including spaces.
User's name can be assigned to Single Line Telephone.
NOTE 2:
The trunk name display is provided on a trunk route basis. The maximum amount of
NOTE 3:
characters in the trunk name display is four. And the maximum number of trunk routes
assignable is 16.
There are two ways to change a name that is currently programmed. By overwriting
NOTE 4:
with a new name, or by inserting a blank space as the first character will cancel the ex-
isting name.
HARDWARE REQUIRED
term
D and DLC card
DESCRIPTION
– 357 –
NAME DISPLAY-D
DATA
Y=0 By Character Code
•
(1) X-XXXXXXXX: Station No.
(2) Character Code 20-7F: Max. 32 digits
See APPENDIX B: CHARACTER
CODE TABLE.
Y=1 By Character
•
(1) X-XXXXXXXX: Station No.
(2) A-Z, 0-9: Character
Max. 16 characters
Y=2 By Character Code
•
(1) 00-14, 16-63: Trunk Name No. as-
signed by CM35 Y=03.
(2) Character Code 20-7F: Max. 8 digits
See APPENDIX B: CHARACTER
CODE TABLE.
Y=3 By Character
•
(1) 00-14, 16-63: Trunk Name No. as-
signed by CM35 Y=03.
(2) A-Z, 0-9: Character Code
Max. 4 characters
term
A2356-10