NEC NEAX 2000 Programming Manual page 839

GENERAL DESCRIPTION
This feature provides a HOT LINE function for a D
STATION APPLICATION
term
All D s
OPERATING PROCEDURES
term
To access from a D :
1. Lift handset or depress Speaker key.
2. Depress subline key associated with predetermined desired station. Destination station is automat-
ically dialled; Ringback Tone is heard, destination station answers.
3. After completion of conversation, hang up or depress RELEASE key.
To make another HOT LINE call immediately, depress another Sub Line key without going on-hook and
off-hook.
SERVICE CONDITIONS
term
1. If one D is used for this application, one of the line key must be assigned as the My Line.
2. HOT LINEs cannot be assigned to a Hunt or UCD Group.
3. Single Line Station, VIRTUAL LINE (SOFTWARE LINE APPEARANCE) can be assigned to BRO-
KERAGE HOT LINE.
4. CALL FORWARDING is allowed if the destination station has set CALL FORWARDING, but CALL
FORWARDING - OUTSIDE cannot be provided.
5. Maximum number of HOT LINES: 100 lines (50 pair).
6. When a station which talks with another party using BROKERAGE - HOT LINE or Sub Line is
accessed from a caller by camp on EXECUTIVE RIGHT OF WAY, CALL WAITING, etc. The service
will be decided effective or not by checking of restriction data using station class of My Line instead of
the station class of BROKERAGE - HOT LINE or Sub Line.
BROKERAGE - HOT LINE - D
ND-91285-001(E)
DECEMBER, 1999
term
term
.
(1/1)
Page 57
Revision 1.0