NEC NEAX 2000 Programming Manual page 425

A
CM2A
Assign the desired Trunk Restriction Class
for each ID Code Pattern number.
Assign the desired Service Restriction
Class A to each ID Code Pattern number.
The features available in each class are
assigned by CM15.
Assign the desired Service Restriction
Class B to each ID Code Pattern number.
The features available in each class are
assigned by CM15.
Assign the desired Service Restriction
Class C to each ID Code. The features
available in each class are assigned by
CM15.
Assign the purpose of ID Code.
B
DESCRIPTION
REMOTE ACCESS TO SYSTEM
Y=11
•
(1) 0000-2999: ID Code Pattern No.
(2) 1 : Unrestricted (RCA)
2 : Non-Restricted-1 (RCB)
3 : Non-Restricted-2 (RCC)
4 : Semi-Restricted-1 (RCD)
5 : Semi-Restricted-2 (RCE)
6 : Restricted-1 (RCF)
7 : Restricted-2 (RCG)
8 : Fully-Restricted (RCH)
Y=12
•
(1) 0000-2999: ID Code Pattern No.
(2) 00-15 : Service Restriction Class A
Y=13
•
(1) 0000-2999: ID Code Pattern No.
(2) 00-15 : Service Restriction Class B
Y=14
•
(1) 0000-2999: ID Code Pattern No.
(2) 00-15 : Service Restriction Class C
Y=10
•
(1) 0000-2999: ID Code Pattern No.
(2) 0 : Validate the ID Code entered from
stations and trunks
2 : Validate the ID Code entered from
trunks
3 : Invalidate the ID Code entered
from stations and trunks
– 405 –
DATA
A2397-10