NEC NEAX 2000 Programming Manual page 72

(2) With AP01 card
START
Assign the AP number to the AP01 card.
CM05
The AP number must match the
NOTE:
SENSE switch setting on the
AP01 card.
CM08 Designate the processor for this feature as
the AP01 card.
Specify whether Service Set Tone should
be sent after dialing the access code for
the Authorization Code.
CM12 Assign the Service Restriction Class A for
Authorization Code to required stations.
CM15 Allow Authorization Code in the Service
Restriction Class A assigned by CM12
Y=02.
CM20 Assign the access code for Authorization
Code.
A
DESCRIPTION
INITIAL
Y=0
•
(1) 04-15: AP No.
(2) 07: AP01 card
(1) 216: Processor for Authorization Code
(2) 1 : AP01 card
(1) 362: Service Set Tone after dialing the
access code
(2) 0 : No tone
1 : Service Set Tone
Y=02
•
(1) X-XXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class
Y=31 Authorization Code
•
(1) 00-15: Service Restriction Class A as-
signed by CM12 Y=02
(2) 1 : Allow
Y=0-3 Numbering Plan Group 0-3
•
(1) X-XXXX: Access Code
(2) A086: Authorization Code
– 52 –
AUTHORIZATION CODE
DATA
A
A2042-10