NEC NEAX 2000 Programming Manual page 894

(1/2)
GENERAL DESCRIPTION
Without answering incoming calls or held calls which terminates to the line keys of a D
party's information can be confirmed by the indications on the LCD. The following information is indi-
cated according to the kind of the calls.
Kind of Calling Party /Network
Extension
MFC-R2 (for other countries only)
Caller ID Class
(for US, other countries only)
ISDN
CCIS
Other trunks
Attendant Console
STATION APPLICATION
term
All D s with an LCD
OPERATING PROCEDURE
1. Press a CID (Caller ID Display) key assigned to the programmable key on the D
term
The D comes into CID mode for six seconds, the CID key lamp lights, and the LCD displays the
calling party's information of the incoming/held call for six seconds.
2. If there are plural incoming calls or held calls, press the desired line key while the CID key lamp lights.
The LCD displays the calling party's information of the incoming/held call for more six seconds.
If the line key which is pressed while CID mode has no incoming/held call, CID mode is cancelled.
3. When the CID key is pressed again in CID mode, the CID key lamp goes out and CID mode is can-
celled.
4. When the CID key is pressed during conversation, the LCD displays the calling party's information of
the incoming/held call for six seconds.
Page 112
Revision 1.0
CALLER ID DISPLAY
Displayed Information
Upper on LCD
Station number
Kind of trunk, trunk number
Kind of trunk, trunk number
Calling party's sub-address
Station number
Kind of trunk
Kind of trunk, trunk number
"OPR"
ND-91285-001(E)
DECEMBER, 1999
term
, the calling
Lower on LCD
Station's name if provided
Calling subscriber's number
Calling subscriber's number or
Calling subscriber's name
Calling subscriber's number
Station's name if provided
Calling subscriber's number
None
None
term
.