Trunk Line Appearance-D Term - NEC NEAX 2000 Programming Manual

TRUNK LINE APPEARANCE-D
PROGRAMMING
START
Assign the terminating system for required
CM30
C.O. trunks to Trunk Line Appearance.
Provide the Trunk with Trunk Line Appear-
ance feature.
Assign the Trunk Line Appearance key to
CM90
term
each D
Assign a Hold key for holding the Trunk
Line Appearance call, to each D
quired.
By this assignment, the held Trunk Line
Appearance call can be Transferred by
voice call, and can be answered by the
Trunk Line Appearance key on the desti-
nation station.
Specify whether a Dial Tone is sent when
CM08
the call is held by the Hold key for Trunk
Line Appearance (CM90 Y=00>F0058).
Specify whether Hold Transfer for a trunk
line placed in Consultation Hold is avail-
able or not.
END
DESCRIPTION
.
term
TRUNK LINE APPEARANCE-D
term
Y=02 Day Mode
•
Y=03 Night Mode
•
Y=40 Mode A
•
Y=41 Mode B
•
(1) 000-255: Trunk No.
(2) 02: Trunk Line Appearance
Y=18
•
(1) 000-255: Trunk No.
(2) 0: To provide
Y=00
•
(1) My Line No. +
(2) D000-D255: Trunk No.
Y=00
•
, as re- (1) My Line No. +
(2) F0058
(1) 365
(2) 0 : Sent
1 : Not sent
(1) 161
(2) 0 : Available (Hold Transfer)
1 : Not available (Consultation Hold)
– 537 –
term
DATA
,
+ Key No.
,
+ Key No.
A2536-10