NEC NEAX 2000 Programming Manual page 396

C
CMD031
Assign the incoming call function to each
status code.
END
The following number of Authorization Codes including Forced Account Codes and Re-
NOTE:
mote Access to System codes can be defined.
MP without EXPMEM card: Approximately 1000 codes
MP with EXPMEM card: Approximately 3000 codes
Number of the codes varies with the number of digits assigned to each code.
For details, refer to APPENDIX D "FEATURES AND SPECIFICATIONS".
page D1
HARDWARE REQUIRED
AP00-B card
To provide Authorization Code:
EXPMEM card on MP card or AP01 card, if required
DESCRIPTION
(1) 2 01
2 : Status Code (Normal)
01: Originating allowed
(Room cut Off Reset)
(2) 1: Yes
(1) X02-X03
X : 1/2: Status code
02: Station cannot be called
(Do Not Disturb Set)
03: Station can be called
(Do Not Disturb Reset)
(2) 0 : No
1 : Yes
(1) X YY
X : 1/2: Status Code
YY: 04-07
(2) (See the table on previous page)
0 : No
– 376 –
PAD LOCK
DATA
A2369-10