Call Forwarding-All Calls; Call Forwarding-All Calls-D Term; Call Forwarding-All Calls-Outside - NEC NEAX 2000 Programming Manual

CALL FORWARDING-ALL CALLS

CALL FORWARDING-ALL CALLS-D

CALL FORWARDING-ALL CALLS-OUTSIDE

PROGRAMMING
START
CM12
Assign the Service Restriction Class A for
this feature to the required stations.
CM15 Allow Call Forwarding-All Calls in the Ser-
vice Restriction Class A assigned by
CM12 Y=02.
When providing Call Forwarding-
NOTE:
All Calls-Outside, set "1" (Allow)
for CM15 Y=00, Y=26.
CM20 Assign the access code for Call Forward-
ing-All Calls, Set and Cancel, respectively.
Assign Call Forwarding-All Calls keys to
CM90
term
the D , as required.
To apply this feature to incoming calls, as-
CM35
sign the combination of trunk route for Tan-
dem connection.
For Resident System Program-
NOTE:
ming, refer to the Command
Manual.
A
DESCRIPTION
CALL FORWARDING-ALL CALLS
CALL FORWARDING-ALL CALLS-D
CALL FORWARDING-ALL CALLS-OUTSIDE
term
(1) X-XXXXXXXX: My Line No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class
Y=00 Call Forwarding-All Calls
•
Y=26
•
Call Forwarding-All Calls-Outside
(1) 00-15: Service Restriction Class A as-
signed by CM12 Y=02
(2) 1 : Allow
Y=0-3 Numbering Plan Group 0-3
•
(1) X-XXXX: Access Code
(2) A010: Set
A011: Cancel
Y=00
•
(1) My Line No. +
(2) F0010: Call Forwarding-All Calls Set/
Y=05
•
(1) 00-63: Trunk Route No.
(2) 1 : Release Signal arrives
– 83 –
DATA
A
,
+ Key No.
Cancel
term
NOTE
NOTE
A2076-10