NEC NEAX 2000 Programming Manual page 921

SERVICE CONDITIONS (CONT'D)
g. When searching is performed, the first 24 digits are displayed if the number exceeds 24 digits
including memory block number.
When system utilizes the SPEED CALLING - STATION memory block 0, 1, 2 and 3 for SPEED
CALLING - SYSTEM, another SYS key on SOFT KEYs should be assigned for each memory
block basis.
• SPEED CALLING - SYSTEM 300 memory
• SPEED CALLING - SYSTEM 1000 memory (Block No. 0): F5016
• SPEED CALLING - SYSTEM 1000 memory (Block No. 1): F5017
• SPEED CALLING - SYSTEM 1000 memory (Block No. 2): F5018
• SPEED CALLING - SYSTEM 1000 memory (Block No. 3): F5019
When the SPEED CALLING - SYSTEM memory is limited to use by CM08, searching of the
SPEED CALLING - SYSTEM 1000 memory should not be done. (Pressing SYS key is ineffec-
tive).
h. When SPEED CALLING security is effective, the speed calling number is not displayed on the
LCD but the name is displayed on the LCD.
5. Originating a Call
a. To originate calls after searching, press either TRK key, Line key (My Line/Sub Line) or Speaker
key, or go off hook.
b. When the user originates call pressing TRK key, registered trunk access code is ignored. When the
user originates call pressing Line key or Speaker key, or going off hook, trunk access code regis-
tered can be processed and appropriate trunk is selected.
c. When the user originates call after searching, the number is registered into the STACK DIAL and
SAVE AND REPEAT.
6. Name Indication
a. A name is displayed on D
following operation:
• SPEED CALLING - SYSTEM originated with Access code and SPEED CALLING number.
• SPEED CALLING - SYSTEM originated with off-hook, press SPEED CALLING - SYSTEM
button and SPEED CALLING NUMBER.
b. A name is displayed on D
following operation:
• SPEED CALLING - STATION originated with Access code and SPEED CALLING number.
• SPEED CALLING - STATION originated with off-hook, press SPEED CALLING - STATION
button (F0064) and SPEED CALLING number.
• SPEED CALLING - STATION originated with SPEED CALLING - STATION button
(F11XX).
• SPEED CALLING - STATION originated with Redial key and SPEED CALLING number.
c. A name displayed on D
the following operation:
• SPEED CALLING - STATION access code and SPEED CALLING number.
• Press SPEED CALLING - STATION button (F0065) and SPEED CALLING number.
• Press Feature key, SPEED CALLING - STATION button (F11XX).
• Press Feature key, Recall key, and dial SPEED CALLING number.
DIAL BY NAME - D
term
when a call is originated by SPEED CALLING - SYSTEM with the
term
when a call is originated by SPEED CALLING - STATION with the
term term
when D user verifies the registered SPEED CALLING number with
ND-91285-001(E)
DECEMBER, 1999
term
(CONT'D)
: F5014 (standard)
(4/5)
Page 139
Revision 1.0