NEC NEAX 2000 Programming Manual page 980

(1/1)
GENERAL DESCRIPTION
This service feature allows a station user to call the last called destination by dialling a special code
instead of dialling all the digits of the number.
STATION APPLICATION
Single Line Telephone
OPERATING PROCEDURE
1. Go off-hook; receive Dial Tone.
2. Dial the feature access code for LAST NUMBER CALL service.
3. The system will automatically redial the last number dialled from that station.
SERVICE CONDITIONS
1. The maximum number of dial digits to which this service is applicable is 32.
2. This service is available for station call, outgoing call and Speed Calling services.
3. This service has a save area on a per LEN basis. Thus, the same D
less of whether the line being used is a "Sub Line" or "My Line".
Page 198
Revision 1.0
LAST NUMBER CALL
ND-91285-001(E)
DECEMBER, 1999
term
can receive this service regard-