Voice Call-Attendant; Voice Call-D Term - NEC NEAX 2000 Programming Manual

VOICE CALL-ATTENDANT

VOICE CALL-D
PROGRAMMING
START
CM08 Specify whether to provide Voice Call
when calling D
a Single-Line Telephone or a D
an LCD.
Specify whether to provide Voice Call
when calling D
Attendant Console.
Provide the system with the Single Digit
Feature Access Code on RBT Connec-
tion.
To activate the Single Digit Feature Ac-
cess Code, set CM08>050, 051, 069 and
148 to "1".
A single digit access code "1" is
NOTE:
fixedly assigned to this feature.
A
term
DESCRIPTION
term
is set to Voice First from
term
without
term
is set to Voice First from
(1) 270
(2) 0 : Not provided (Busy Tone)
1 : To provide
(1) 271
(2) 0 : Not provided (Busy Tone)
1 : To provide
(1) 156
(2) 0: Available
(1) 050: *Button as Switch Hook Flash
(2) 1 : Ineffective
(1) 051: #Button as Switch Hook Flash
(2) 1 : Ineffective
(1) 069: Single Digit Dialing on BT Con-
nection
(2) 1 : Step Call
(1) 148: Same Last Digit Redialing on BT
Connection
(2) 1 : Ineffective
– 568 –
VOICE CALL-ATTENDANT
VOICE CALL-D
DATA
A2566-10
term