NEC NEAX 2000 Programming Manual page 700

A
CM51
Assign the Message Front destination to
be routed by dialing MW Retrieve code or
pressing MW key on D
sage Waiting is set.
CM08 If an Attendant Console is assigned to as
the Message Front destination by CM51
Y=15, set the data for 233 to 0 and set the
data for 234 to 1. With this setting, Mes-
sage Waiting is automatically reset when
the attendant answers.
To reset Message Waiting while the Mes-
sage Front station or attendant rings, set
the data for 234 to 0.
To reset Message Waiting when the de-
sired station answers a second call from
the Message Front station or attendant,
set the data for 235 to 0 and set the data
for 234 to 1.
Specify whether Message Waiting record
is printed out on Hotel Printer, and the re-
port is sent to PMS when setting or reset-
ting Message Waiting.
CM90 Assign the Message Waiting function key
term
to the D
Front Desk Terminal or Attendant Console,
if provided.
B
DESCRIPTION
term
to which Mes-
of administrative station or
Y=15
•
(1) 00-63: Tenant No. to which MW set
(2) X-XXXX: Station No./My Line No.
or
E000: Attendant Console
(1) 233
(2) 0: Available
(1) 234
(2) 1 : Not available
(1) 234
(2) 0: Available
(1) 235
(2) 0: Available
(1) 234
(2) 1 : Not available
(1) 267
(2) 0 : Available
1 : Not available
Y=00
•
(1) My Line No. +
(2) • For administrative station
F0040: Message Waiting Set
F0041: Message Waiting Reset
• For guest station w/o MW Lamp
F1005: Message Waiting Lamp
(1) ATTCON No. (E000-E007) +
No.
(2) F6101: Message Waiting
F6104: Reset
– 680 –
MESSAGE WAITING
DATA
term
D belongs
,
+ Key No.
,
+ Key
A2679-10