NEC NEAX 2000 Programming Manual page 502

PROGRAMMING
Precaution
Before programming the system data for SMDR, confirm that the system is under the following
status.
• The system is under On-Line mode. ("RUN" lamp is flashing on the MP card.)
• The AP00 card is mounted in the correct location. (for SMDR with AP00)
• All the system data pertaining to the station, trunks, and service features are already pro-
grammed.
Station Number Data Loading
The AP00 stores the station number data loaded from the MP. When station numbers have been
added, deleted or changed by CM10, the station number data must be reloaded to the AP00 by
the following procedure.
(1) Flip the MB switch of the AP to UP position.
(2) Return the MB switch to DOWN position.
(3) The "**** AP00 START ****" message is printed if a printer is provided.
(4) The "SORT COMPLETE" message is printed when the station number has been sent to the
AP.
STATION MESSAGE DETAIL RECORDING (SMDR)
Precaution/Station Number Data Loading
– 482 –
PROGRAMMING
A2477-10