NEC NEAX 2000 Programming Manual page 310

D
CM8A
If the prefix is to be added, assign the fol-
lowing data to the LCR Pattern number.
(1) Assign the 6-digit Prefix Pattern num-
ber to the LCR Pattern number.
(2) Assign the office code (3-digits) requir-
ing the Prefix to the 6-digit Prefix Pat-
tern number.
CM85 Specify the maximum number of digits to
be dialed by calling party.
The maximum number of digits including
the area codes should be assigned to
each area code.
CM35 Provide the Toll Restriction feature to the
required trunk routes.
Specify route access capability for each
restriction class.
Assign the Area Code Development Pat-
tern number for Toll Restriction and Maxi-
mum Digit Analysis to each trunk route.
END
See LCR Development Sequence and Examples in the following pages.
DESCRIPTION
LEAST COST ROUTING-3/6 DIGIT
Y=5000-5255
•
LCR Pattern No. 000-255
(1) 150
(2) 8050-8099: 6-digit Prefix Pattern No.
CCC: No Prefix
Y=8000-8049
•
(1) XXX: 3-digit of Office Code
(2) 1 : Allowed
Y=5-7 Area Code Development Pattern
•
No. 5-7 assigned by CM8A
Y=A000
(1) X-X...X: Area code dialed, Max 8 digits
(2) 01-24
25-79: 25 digits-79 digits
Y=11
•
(1) 00-63: Trunk Route No.
(2) 0: To provide
Y=51-58
•
(1) 00-63: Trunk Route No.
(2) 0 : Restricted
1 : Allowed
Y=76
•
(1) 00-63: Trunk Route No.
(2) 05-07: Area Code Development Pat-
– 290 –
DATA
00-49
: 1 digit-24 digits
tern No. 5-7
A2286-10