Message Reminder-D Term - NEC NEAX 2000 Programming Manual

MESSAGE REMINDER-D
PROGRAMMING
To provide Message Reminder service for each station:
START
CM08
Select MSG Display on D
To activate Single Digit Feature Access
Code (1, 2, 3 and 6) feature, set the data
for 050, 051, 069 and 148 to "1".
A single digit access code "6" is
NOTE:
fixedly assigned to set Message
Reminder.
Provide the system with Single Digit Fea-
ture Access Code on RBT or Voice Call
Connection.
Provide the system with Single Digit Fea-
ture Access Code on busy Connection.
Provide the system with the automatic
cancel of Message Reminder while the
called station rings.
Specify the Automatic Cancel of Message
Reminder when the desired station an-
swers.
Specify the sending of Special Dial Tone
for Attendant Console or station when dial-
ing a feature access code.
A
term
DESCRIPTION
term
. (1) 025
(2) 0 : MSG (only)
1 : MSGX (X: No. of messages)
(1) 050: * Button as Switch Hook Flash
(2) 1 : Ineffective
(1) 051: # Button as Switch Hook Flash
(2) 1 : Ineffective
(1) 069: Single Digit Dialing on BT
Connection
(2) 1 : Step Call
(1) 148: Same Last Digit Redialing on BT
Connection
(2) 1 : Ineffective
(1) 156
(2) 0: Available
(1) 208
(2) 0: Available
(1) 234
(2) 0 : Available
1 : Not available
(1) 235
(2) 0 : Available
1 : Not available
(1) 236
(2) 0 : Tone is not sent
1 : Tone is sent
– 332 –
MESSAGE REMINDER-D
DATA
term
A2325-10