NEC NEAX 2000 Programming Manual page 355

A
Assign the Message Front destination of
CM51
the retrieve call from the station to which
Message Waiting is set.
By pressing MW Retrieve access code or
MW key on D
destination.
Assign the Lamp color on D
CM08
Message Waiting is set.
Specify the Message Lamp Indication
Pattern on D
If Attendant Console is assigned as the
Message Front destination by CM51 Y=15,
set the data for 233 to 0.
With this setting, Message Waiting is auto-
matically reset when the attendant an-
swers.
To reset Message Waiting indication while
the Message Front station or attendant
rings, set the data for 234 to 0.
To reset Message Waiting indication when
the desired station answers a second call
from the Message Front station or atten-
dant, set the data for 235 to 0.
CM90 Assign the Message Waiting key to re-
quired stations, if required.
B
DESCRIPTION
term
, the call is routed to the
term
when
term
.
MESSAGE WAITING LAMP SETTING-ATTENDANT
MESSAGE WAITING LAMP SETTING-STATION
Y=15
•
(1) 00-63: Tenant No. to which MW set
(2) X-XXXXXXXX: Station No./My Line No.
E000: Attendant Console
(1) 144
(2) 0 : Green
1 : Red
(1) 294
(2) 0 : Flashing (60 IPM)
1 : Steady Lighting
(1) 233
(2) 0: Available
(1) 234
(2) 0: Available
(1) 235
(2) 0: Available
Y=00
•
(1) My Line No. +
(2) • For setting station
F0040: Message Waiting Set
F0041: Message Waiting Reset
• For set station w/o MW Lamp
F1005: Message Waiting Lamp
– 335 –
DATA
term
D belongs
,
+ Key No.
A2325-10