NEC NEAX 2000 Programming Manual page 850

Integrated voice server, integrated multimedia exchange
Hide thumbs Also See for NEAX 2000:
Table of Contents

Advertisement

(1/2)
CALL FORWARDING - ALL CALLS - OUTSIDE
GENERAL DESCRIPTION
This service feature is an expansion of CALL FORWARDING - ALL CALLS, and allows a call which
originates from a station or trunk and is destined for a station to be routed to another station outside the
system via the appropriate trunk line. A maximum of 26 digits may be stored when this feature is activated
by the station user. When this feature is activated, a short burst of ringing is given to the original station
line as a reminder that CALL FORWARDING is activated.
STATION APPLICATION
All stations
OPERATING PROCEDURE
To direct all incoming calls for a station to an outside location:
1. Lift the handset; receive Dial Tone.
2. Dial the CALL FORWARDING - ALL CALLS - OUTSIDE access code (same as CALL FOR-
WARDING - ALL CALLS); receive Special Dial Tone.
3. Dial the trunk access code and the desired telephone number.
4. If forwarding is accepted, Service Set Tone will be heard.
5. If forwarding is denied, Reorder Tone will be heard.
To cancel:
1. Lift the handset; receive Dial Tone.
2. Dial the CALL FORWARDING - ALL CALLS - OUTSIDE cancellation code (same as CALL
FORWARDING - ALL CALLS); receive Service Set Tone.
SERVICE CONDITIONS
1. Stations may be assigned this feature via CLASS OF SERVICE - INDIVIDUAL programming in sys-
tem data.
2. The forwarding station is recorded by STATION MESSAGE DETAIL RECORDING (SMDR) as the
originating station of calls that are forwarded when using this feature.
3. CALL FORWARDING data remains programmed even if the system is re-initialized or a power failure
occurs.
4. CALL FORWARDING - ALL CALLS - OUTSIDE calls can be restricted by the Route Restriction
Class (RSC) of each originating station.
5. Route Peg Count is utilized for CALL FORWARDING - ALL CALLS - OUTSIDE.
6. The maximum number of simultaneous service settings per system is 496 stations, including CALL
FORWARDING - BUSY LINE - OUTSIDE, DON'T ANSWER - OUTSIDE settings.
MP without expansion memory (standard) : 240 stations
MP with expansion memory (optional)
Page 68
Revision 1.0
: 496 stations
ND-91285-001(E)
DECEMBER, 1999

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Neax 7400 ics m100mx

Table of Contents