NEC NEAX 2000 Programming Manual page 474

B
CM72
Assign the number to be called to Memory
Slot number allocated by CM71.
Assign the station name for display, to the
Memory Slot number allocated by CM71,
by character codes or character.
Specify Speed Calling-System security.
CM08
(Stored number displays on D
outgoing call by Speed Calling-System.)
Specify whether to provide Toll Restriction
for an outgoing call by Speed Calling-Sys-
tem.
Assign an access key for Speed Calling-
CM90
System to the D
END
DESCRIPTION
term
for an
term
s, as needed.
SPEED CALLING-SYSTEM-D
Y=0
•
(1) 000-299: Memory Slot No.
(2) Stored No.:
Outgoing Access code (Max. 4 digits) +
,
+ Called Party's No. (Max. 26 digits)
To set a pause into the Stored No., enter "C"
(Fixed pause=1.5 sec.) or "D" (Programma-
ble pause specified by CM41 Y=0>38) after
desired digits.
Y=1
•
(1) 000-299: Memory Slot No.
(2) XX...XX: Station Name Character
See APPENDIX B: CHARACTER
CODE TABLE.
Y=2
•
(1) 000-299: Memory Slot No.
(2) XX...XX: Station Name Character
(1) 043
(2) 0 : Not displayed
1 : To display
(1) 044
(2) 0 : Not provided
1 : To provide
Y=00
•
(1) My Line No. +
(2) F0067: Speed Calling-System origina-
– 454 –
SPEED CALLING-SYSTEM
DATA
Code (Max. 32 digits, 16 char-
acters)
(Max. 16 characters)
,
+ Key No.
tion (300-Slot Memory Block)
term
A2452-10