NEC NEAX 2000 Programming Manual page 166

To provide an outside party on DID call with the Call Waiting feature:
START
CM08 Specify the Camp-On (Call Waiting) Tone
sent to a busy station.
CM35 Assign the Call Waiting for DID call to the
Trunk Route.
CM42 Specify the number of times for Call Wait-
ing tone.
This data is effective when the
NOTE:
2nd data of CM08>367: 0.
CM76 Allow the Call Waiting for DID call per sta-
tion number.
This data is effective when the
NOTE:
2nd data of CM35 Y=18: 0.
END
DESCRIPTION
(1) 367
(2) For Australia/Other Countries:
0 : Every 4 sec.
1 : Only once
For New Zealand:
0 : Only once
1 : Every 2 min.
Y=59
•
(1) 00-63: Trunk Route No.
(2) 0 : To provide
1 : Not provided
(1) 18
(2) 01-99: Number of Times
If no data is set, the default setting is no lim-
itation.
Y=10
•
(1) 000-999: Number Conversion Block
(2) 1 : Allow
– 146 –
CALL WAITING-TERMINATING
DATA
No. assigned by CM76 Y=00
A2131-10