NEC NEAX 2000 Programming Manual page 511

D
CMD001
If the masking of Authorization Codes sent
to the SMDR terminal is required, assign
the desired value to be added to the Au-
thorization Code dialed.
For example:
To mask the Authorization Code "1234" by
adding "5" to all digits:
(1) 160
(2) 5
(1) 161
(2) 5
With this assignment, "6789" is sent to
SMDR Terminal.
Assign maximum number of Call Record
CMD003
for SMDR which is set to "4" by
CMD001>80/100/120/140.
When the data is set to 1-27000,
NOTE 1:
external alarm of memory over-
flow is available, if CM44, 2nd
data=3001 is assigned.
The amount of call record number set by CMD003>23, 24, 25, 26, 28, 29, 30 must
NOTE 2:
not exceed the following number.
No EXPMEM on AP00 is provided
When CMD001>179
is set to 0
(Not a center office of
Centralized Billing-CCIS)
1600
E
DESCRIPTION
(1) 162
1st digit
(2) 5
(1) 163
2nd digit
(2) 5
Amount of Call Record number of CMD003 1st data 23, 24, 25, 26, 28, 29, 30
When CMD001>179
is set to other than 0
(center office of Central-
ized Billing-CCIS)
800
STATION MESSAGE DETAIL RECORDING (SMDR)
(1) 160-175: Designation of digit to be
(2) 0 : No masking
1-11: Value to be added to the desig-
12 : Masking with "X"
3rd digit
4th digit
(1) 29
(2) 0
1-27000: 1 call-27000 calls
EXPMEM on AP00 is provided
When CMD003>28
is set to 0
(Call Record for CIS is not
provided)
27000
– 491 –
PROGRAMMING
SMDR with AP00 Programming
DATA
masked: 1st digit-16th digit
nated digit of Authorization Code.
: Not Record
When CMD003>28
is set to other than 0
(Call Record for CIS is
provided)
26000
A2486-10