A
CM13
Provide the SMDR service for outgoing
calls to the required station.
Provide the SMDR service for outgoing
CM35
calls to the required trunk routes.
Assign a trunk access code sent to SMDR
for outgoing calls.
Specify the timing of SMDR valid call timer
CM41
(pseudo-answer timer).
CM08
Specify the method of charging a trans-
ferred call.
The following table shows the station to
which call charging is to be made in the
case of various transfer patterns.
DESTINATION
FROM
STA A
STA
ATT
ATT A
STA: Station
B
DESCRIPTION
CM08>424=1
TO
Split charging to STA A
STA B
and STA B
ATT
STA
STA
STA
Split charging to ATT A
ATT B
and ATT B
ATT: Attendant Console
STATION MESSAGE DETAIL RECORDING (SMDR)
Y=06
•
(1)
X-XXXXXXXX: Station No.
(2)
1 : To provide
Y=14
•
(1)
00-63: Trunk Route No.
(2)
1 : To provide
Y=44
•
(1)
00-63: Trunk Route No.
(2)
00-99: Trunk access code
Y=0
•
(1)
03 (Pseudo-answer timer)
(2)
00-08: 8 sec. -40 sec.
If no data is set, the default data is 20-24
sec.
(1)
424: Charging method
(2)
0 : Charging to the first transferring
station or the final destination sta-
tion
1 : Split charging to both the transfer-
ring station and the transfer desti-
nation station
(1)
425: Charging destination
(2)
0 : First transferring station
1 : Final transfer destination station
CM08>424=0
CM08>425=1
STA B
STA
STA
ATT B
– 484 –
PROGRAMMING
Built-in SMDR Programming
DATA
(4 sec. increments)
CM08>424=0
CM08>425=0
STA A
STA
STA
ATT A
A2477-10