Split Call Forwarding-All Calls - NEC NEAX 2000 Programming Manual

SPLIT CALL FORWARDING-ALL CALLS

PROGRAMMING
START
CM12 Assign Service Restriction Class A for
Split Call Forwarding-All Calls to required
stations.
Allow Call Forwarding-All Calls/Call For-
CM15
warding-All Calls-Outside in the Service
Restriction Class A assigned by CM12
Y=02.
To provide Call Forwarding-All
NOTE:
Calls-Outside, set "1" (Allow) for
CM15 Y=00, Y=26.
CM20 Assign the access code for Call Forward-
ing-All Calls, Entry and Cancel, respec-
tively.
Assign the access code for Split Call For-
warding-All Calls.
To apply this feature to incoming calls, as-
CM35
sign the combination of trunk routes for
Tandem Connection.
CM36
A
DESCRIPTION
SPLIT CALL FORWARDING-ALL CALLS
Y=02
•
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class
Y=00 Call Forwarding-All Calls
•
Y=26
•
Call Forwarding-All Calls-Outside
(1) 00-15: Service Restriction Class A as-
(2) 1 : Allow
Y=0-3 Numbering Plan Group 0-3
•
(1) X-XXXX: Access Code
(2) A010: To entry
A011: To cancel
(1) X-XXXX: Access Code
(2) A180: Split Call Forwarding-All Calls
Entry
A181: Split Call Forwarding-All Calls
Cancel
Y=05
•
(1) 00-63: Trunk Route No.
(2) 1 : Release Signal arrives
Y=0
•
(1) Incoming Trunk Route No. + Outgoing
Trunk Route No. assigned by CM35
Y=05
(2) 0: Allow
– 457 –
DATA
A
signed by CM12 Y=02
A2452-10