NEC NEAX 2000 Programming Manual page 170

To assign the Trunk Restriction Class:
START
CM12
Assign the Trunk Restriction Class to each
station.
Set the Outgoing/Incoming Trunk Route
CM35
Restriction Data by Trunk Restriction
Classes (RCA-RCH).
END
DESCRIPTION
CLASS OF SERVICE-INDIVIDUAL
Y=01 Trunk Restriction Class
•
(1) X-XXXXXXXX: Station No.
(2) X Z
X: 1 -8: Trunk Restriction Class in Day
Z: 1 -8: Trunk Restriction Class in
Y=51-58 Outgoing Trunk Restriction
•
Y=61-68 Incoming Trunk Restriction
•
(1) 00-63: Trunk Route No.
(2) 0 : Restricted
1 : Allow
– 150 –
DATA
Mode.
Night Mode.
1: Unrestricted (RCA)
2: Non-Restricted 1 (RCB)
3: Non-Restricted 2 (RCC)
4: Semi-Restricted 1 (RCD)
5: Semi-Restricted 2 (RCE)
6: Restricted 1 (RCF)
7: Restricted 2 (RCG)
8: Fully-Restricted (RCH)
Data
Data
A2148-10