NEC NEAX 2000 Programming Manual page 351

To add ANI (Automatic Number Identification) information to the MCI message format when the
ANI information is sent from network, do the following programming.
C
Provide sending of ANI information from
CM35
network to the VMS with MCI.
CMD001 Specify the message format sent to the
VMS with MCI as Expanded (with ANI)
format.
END
DESCRIPTION
MESSAGE CENTER INTERFACE (MCI)
Y=138
•
(1) 00-63: Trunk Route No.
(2) 0: To send
(1) 36
(2) 1: Expanded (with ANI)
– 331 –
PROGRAMMING
MCI Programming
DATA
A2325-10