NEC NEAX 2000 Programming Manual page 628

(2) DID Data Assignment
START
Assign the MFC Signaling to required DID
CM35
trunk route.
CM31
Assign the number of received digits of
ANI signal from PSTN.
CM31 Y=1>3 setting is required
NOTE:
when CM08>472 is assigned to
0.
Assign the sending Backward GA signals
depending on the specification of each
country.
Assign the sending Backward GB signals
depending on the specification of each
country.
Assign the sending Backward GC signals
(For Mexico only).
Assign the Pulse Form/Pulse Type-1/
Pulse Type-2 signals.
In Malaysia and Poland, no data
NOTE 1:
setting is required.
NOTE 2: For details of Pulse Form/Pulse
Type-1/Pulse Type-2 signals, re-
fer to the Command Manual.
A
DESCRIPTION
INITIAL
INITIAL
INITIAL
INITIAL
INITIAL
FEATURES FOR OTHER COUNTRIES ONLY
MFC-INCOMING CALL/MFC-OUTGOING CALL
Y=37
•
(1) 00-63: Trunk Route No.
(2) 0: Available
Y=1
•
(1) 3
(2) 01-31: 1 digit-31 digits
NONE
Y=3: Backward GA
•
(1) 00-15
(2) 01-15
NONE
Y=4: Backward GB
•
(1) 00-15
(2) 01-15
NONE
Y=5: Backward GC
•
(1) 00-15
(2) 01-15
NONE
Y=A
•
(1) 05: Pulse Form signal
06: Pulse Type-1 signal
07: Pulse Type-2 signal
(2) 01-15
NONE
NOTE 3:
– 608 –
DATA
NOTE 3
Refer to the "MFC Data Assign-
ment Table for Each Country".
page 615
A2594-10