NEC NEAX 2000 Programming Manual page 175

To provide the LDN Diversion feature, the following programming is also required:
START
CM08
Provide the system with the LDN Diversion
feature.
CM58 Assign the data for LDN Diversion to each
indialed number assigned by CM50 Y=01,
02.
A call is diverted to LDN0-7/
NOTE:
TIE0-7 keys as specified by
CM58 Y=02-07, even if CM50
Y=01, 02>1-8 has been set.
A
DESCRIPTION
(1) 205
(2) 0: Available
Y=00 Tenant No. of LDN
•
(1) 00-08/10-18:
LDN0-7/TIE0-7 assigned by CM50
Y=01/Y=02
(2) 00-63: Tenant No.
Y=01 TAS Group No.
•
(1) Same as CM58 Y=00
(2) 00-63: TAS Group No.
Y=02 Day Mode destination of LDN
•
(1) Same as CM58 Y=00
(2) 00-07: LDN0/TIE0 key-LDN7/TIE7 key
08: To TAS
09: To the station/outside party as-
signed by CM58 Y=08
Y=03 Night Mode destination
•
(1) Same as CM58 Y=00
(2) 00-07: LDN0/TIE0 key-LDN7/TIE7 key
08: To TAS
09: To the station/outside party as-
signed by CM58 Y=09
Y=04 Day Mode diversion for busy des-
•
tination station
(1) Same as CM58 Y=00
(2) 00: To Attendant Console BUSY key
08: To TAS
09: Camped on
– 155 –
COMMON ROUTE INDIAL
DATA
A2148-10