Adss: Assignment Of Direct Station Select - NEC NEAX 7400 IMX Command Manual

ADSS: Assignment of Direct Station Select

1. General
This command is used to assign the called number data corresponding to the Hotel Attendant Console's DSS
(Direct Station Select) key.
2. Precautions
1. This command is used for the Hotel Application only.
2. The DSS function is only valid for the Hotel Attendant Console and may not be assigned for Business Sys-
tem Console.
3. DSS Function Key Numbers are 1 to 10. These ten numbers correspond to values 1 to 10 for the DSS pa-
rameter of this command.
4. This feature must be enabled in ASYD, SYS1, INDEX 161, bit5 in order to operate.
ND-70348 (E)
ADSS
CHAPTER 4
Page 800
Revision 3.0