NEC NEAX 2000 Programming Manual page 626

PROGRAMMING
(1) MFC Signaling Common Data Assignment
START
Assign the AP number to MFC trunk.
CM05
The AP number must match the SENSE
and changeover switch settings on the
MFC trunk card.
Assign MFC Trunk number to each MFC
CM06
trunk.
Assign the MFC PAD control level to Back-
CM31
ward signals.
Assign the sensitive level of MFC Sender
and Receiver.
A
DESCRIPTION
INITIAL
INITIAL
INITIAL
FEATURES FOR OTHER COUNTRIES ONLY
MFC-INCOMING CALL/MFC-OUTGOING CALL
Y=0
•
(1) 04-15, 20-31: AP No.
(2) 08: MFC trunk
Y=04
•
(1) 00-15: MFC trunk No.
(2) XX Z
XX: 04-15, 20-31: AP No. assigned by
Z : 0-3: Circuit No.
Y=1
•
(1) 0: MFC PAD control (PAD Level)
(2) 0: –8 dBm,
2: –11.5 dBm,
4-7 : Not used
Y=1
•
(1) 1: Sensitive level of MFC Sender and
Receiver (PAD Level)
(2) 00: –26 dBm, 01 : –27 dBm
02: –28 dBm, 03 : –29 dBm
04: –30 dBm, 05 : –31 dBm
06: –32 dBm, 07 : –33 dBm
08: –34 dBm, 09 : –35 dBm
10: –36 dBm, 11 : –37 dBm
12: –39 dBm, 13 : –40 dBm
14: –41 dBm, 15 : –38 dBm
– 606 –
DATA
CM05
1: –10 dBm
3: –9.13 dBm
A2594-10