NEC NEAX 2000 Programming Manual page 918

Integrated voice server, integrated multimedia exchange
Hide thumbs Also See for NEAX 2000:
Table of Contents

Advertisement

(1/5)
GENERAL DESCRIPTION
This feature allows D
tered in the system and they are shown on the LCD of D
by name with UP or DOWN key appeared on the SOFT KEY. When D
call is originated by depressing the Line/Trunk key or going off hook.
STATION APPLICATION
term
All D
s with an LCD and SOFT KEY
OPERATING PROCEDURE
To search calling number by name and originate a call by SPEED CALLING - SYSTEM:
1. From idle status, press SYS key on SOFT KEY.
2. Enter a name by keypad.
3. Press UP or DOWN key on SOFT KEY.
4. The name and its telephone number are shown on the LCD.
5. Press UP or DOWN key to find a required name and telephone number.
6. After find the desired name and number, press Line/Trunk key or go off hook to originate a call.
To search calling number by name and originate a call by SPEED CALLING - STATION:
1. From idle status, press STA key on SOFT KEY.
2. Enter a name by keypad.
3. Press UP or DOWN key on SOFT KEY.
4. The name and its telephone number are shown on the LCD.
5. Press UP or DOWN key to find a required name and telephone number.
6. After find the desired name and number, press Line/Trunk key or go off hook to originate a call.
To register a name and number for call by SPEED CALLING - STATION:
1. From idle status, press STA key on SOFT KEY.
2. Press Feature key and enter a name. The LCD displays the name typed in.
3. Press Feature key and enter a number. The LCD displays the number dialed.
4. Press Feature key. The LCD displays "SET OK"
SERVICE CONDITIONS
1. Service
term
a. Up to 32 D
s are available to use this feature at the same time.
term
b. The D
returns to idle status after the ten seconds from pressing SYS/STA key and no key opera-
tion is activated.
c. If the memory block for SPEED CALLING is not assigned to the D
effected when the D
d. This service feature is ended or interrupted by pressing the Hold key.
term
e. When the D
uses this feature, the incoming call to My Line is rejected.
Page 136
Revision 1.0
DIAL BY NAME - D
term
user to search the desired number by name. The number and name are regis-
term
user presses these keys.
ND-91285-001(E)
DECEMBER, 1999
term
term
term
. The D
user can search the desired number
term
user finds desired number, the
term
, the SYS/STA key is not

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Neax 7400 ics m100mx

Table of Contents