NEC NEAX 2000 Programming Manual page 393

(2) With MP card
START
Designate the MP card for Authorization
CM08
Code.
Specify the Service Set Tone after dialing
the access code for Authorization Code.
Set the data for 281 to 1. (Maid ID Code is
not used.)
CM15
Assign the Service Restriction Class A al-
lowed for Authorization Code feature.
Assign allowed class and restricted class
for Maid Status feature in Service Restric-
tion Class B.
CM12
To the station that uses Pad Lock feature,
assign the Service Restriction Class A al-
lowed for Authorization Code feature.
Moreover, to all the station, assign the Ser-
vice Restriction Class B restricted for Maid
Status feature.
CM20 Assign the access code for Authorization
Code.
A
DESCRIPTION
(1) 216: Designation of Processor for Au-
thorization Code
(2) 0: MP card
(1) 362: Service Set Tone after dialing the
access code
(2) 1 : Service Set Tone
(1) 281
(2) 1 : Not available
Y=31 Authorization Code
•
(1) 00-15: Service Restriction Class A
(2) 1 : Allow
Y=75 Maid Status
•
(1) 00-15: Service Restriction Class B
(2) 0 : Restricted
1 : Allow
Y=02
•
(1) X-XXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class
ZZ: 00-15 : Service Restriction Class
Y=0-3 Numbering Plan Group 0-3
•
(1) X-XXXX: Access Code
(2) A086: Authorization Code
– 373 –
PAD LOCK
DATA
A
B
A2369-10