Trunk To Trunk Transfer Before Answer By Attendant Console - NEC NEAX 2000 Programming Manual

TRUNK TO TRUNK TRANSFER BEFORE ANSWER BY ATTENDANT CONSOLE

TRUNK TO TRUNK TRANSFER BEFORE ANSWER BY AT-
TENDANT CONSOLE
PROGRAMMING
START
Provide the system with this feature.
CM08
END
The trunk associated with at least one side of the call must be programmed for answer
NOTE:
and/or release signal(s) to ensure the trunks do not lock up.
As for the data to be assigned to each trunk, refer to "TRUNK TO TRUNK
CONNECTION".
DESCRIPTION
page 540
(1) 206
(2) 0 : Available
1 : Not available
– 544 –
DATA
A2536-10