NEC NEAX 2000 Programming Manual page 872

(1/1)
GENERAL DESCRIPTION
term
If a D user makes a call hold operation by depressing Hold key while engaging in a trunk call, the
call is held on the CALL PARK key on that D
Since CALL HOLD is also indicated on other D
on hold can be answered from any of such D
STATION APPLICATION
term
All D s
OPERATING PROCEDURE
To park a call:
1. Depress Hold key; receives Dial Tone.
2. The call is held on CALL PARK key.
To retrieve a parked call:
1. Depress CALL PARK key; the parked call is reconnected.
SERVICE CONDITIONS
1. A maximum of 8 CALL PARK keys can be assigned.
2. CALL PARK keys on the D
For example, if a trunk call is held on No. 1 CALL PARK key of a D
Call Hold is indicated on No. 1 CALL PARK key on all the D
3. To answer a trunk call on hold on CALL PARK key from a single telephone, dial "Call Park Answer
Special Code" + CALL PARK Key number.
4. CALL PARK is valid only for a trunk call.
5. A maximum number of 8 calls can be parked simultaneously within the same tenant.
Page 90
Revision 1.0
CALL PARK - D
term
.
term
s on which CALL PARK key is assigned, the call
term
s.
term
s within the same one tenant are all connected in multiple.
ND-91285-001(E)
DECEMBER, 1999
term
term
belonging to a certain tenant,
term
s within the same tenant.