Attendant Delay Announcement - NEC NEAX 2000 Programming Manual

ATTENDANT DELAY ANNOUNCEMENT

PROGRAMMING
START
CM10 Assign a Digital Announcement Trunk card
number to the required LEN.
The Digital Announcement Trunk
NOTE:
card number must be assigned
to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4) and the seventh LEN
(Level 6) of each LT slot.
Allow the Announcement Service via Digi-
CM35
tal Announcement Trunk on Attendant De-
lay Announcement.
Assign the function of the Digital An-
CM49
nouncement Trunk card.
CM08 Specify the replay timer of the message
recorded in the Digital Announcement
Trunk.
A
DESCRIPTION
ATTENDANT DELAY ANNOUNCEMENT
(1) 000-763: LEN
(2) EB002-EB127: Digital Announcement
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE:
Y=74
•
(1) 00-63: Trunk Route No.
(2) 0: Allow
Y=00
•
(1) 000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
(2) 0FXX : Attendant Delay Announcement
XX: 00-63: Message No.
Y=0A
•
(1) 00-63: Tenant No. of Trunk assigned by
CM30 Y=01
(2) 00-63: Message No. assigned by
CM49 Y=00
(1) 165
(2) 0 : Replay at an interval assigned by
CM41 Y=0>47
1 : Replay only once
– 35 –
DATA
Trunk Card No.
EB000 and EB001 are dedi-
cated to built-in Digital An-
nouncement Trunk of the MP
card.
Card No. (EB002-EB127) as-
signed by CM10
A2032-10