NEC NEAX 2000 Programming Manual page 592

To provide the Message which is sent when the service feature setting to the station is completed
or canceled:
START
CM49 Assign the function for each Digital An-
nouncement Trunk card.
Assign the Message number when service
setting is completed or canceled to station.
CM41 Message Replay Timer for Announcement
Service.
END
HARDWARE REQUIRED
DAT card or MP card (Built-in DAT)
DESCRIPTION
Y=00
•
(1) 000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
(2) 17XX: Voice Guide
XX: 00-63: Message
Y=13
•
(1) 01: Message sent when service is set
02: Message sent when service is can-
celed
(2) 00-63: Message No.
Y=0
•
(1) 53
(2) 01-99: 4 sec.-396 sec.
If no data is set, the default setting is 60-64
sec.
– 572 –
VOICE GUIDE
DATA
No. (EB002-EB127) assigned
by CM10
(4 sec. increments)
A2566-10