NEC NEAX 2000 Programming Manual page 895

SERVICE CONDITIONS
term
1. A maximum of 8 D
which is on Call Redirect operation.
2. CID mode is continued for 6 seconds after the CID key is pressed. After 6 seconds, the CID key lamp
goes out automatically and CID mode is cancelled.
3. If there is no incoming/held call on the line key and there is no CAMP-ON call, the D
come into CID mode even if the CID key is pressed.
4. If there are plural incoming/held calls, CALL WAITING/CAMP-ON calls, the following priority for
displaying is applied:
a. CALL WAITING/CAMP-ON call information set to the call in progress on the D
b. Incoming/held call information in order of the line key number (younger to older number).
5. When a call is transferred by CONSULTATION HOLD, the display shows the following information:
a. Before the transfer operation finishes; the LCD displays the information of the station which holds
b. After the transfer operation finishes; the LCD displays the information of the held station/trunk.
6. When a call is set EXECUTIVE HOLD, the call information cannot be displayed on the other D
7. The information of voice call cannot be displayed.
8. When the following terminating system is assigned to the trunk, the calling party information of the
call which is terminated to the trunk access key can be displayed by the CID key.
a. Trunk line Appearance
b. Trunk line Appearance
CALLER ID DISPLAY (CONT'D)
s can come into CID mode simultaneously per system, including the terminal
the call.
TAS
+
ND-91285-001(E)
DECEMBER, 1999
(2/2)
term
does not
term
.
term
.
Page 113
Revision 1.0