NEC NEAX 2000 Programming Manual page 619

A
Specify the ringing tone for each calling
CMDB
number, if required.
Specify which is displayed on the LCD,
when receiving both the calling number
and the name from network on incoming
call.
Specify whether the Call Waiting is set for
each calling number or not.
Specify whether the UCD Priority Queuing
is set for each calling number or not.
Specify the priority for calling name dis-
play.
Specify the type of Single Data Message
Frame Format.
END
DESCRIPTION
FEATURES FOR OTHER COUNTRIES ONLY
Y=04 Ringing tone assignment
•
(1) 0-1499: Development Table No.
(2) 0 : Depends on CM35 Y=33
1 : Not used
2 : Internal ringing tone
3 : External ringing tone
Y=05
•
Calling Number/Calling Name Display
(1) 0-1499: Development Table No.
(2) 0 : Calling Number Display
1 : Calling Name Display
Y=06 Call Waiting
•
(1) 0-1499: Development Table No.
(2) 0 : Not available
1 : Available
NOTE:
Y=07 UCD Priority Queuing
•
(1) 0-1499: Development Table No.
(2) 0 : Not Priority
1 : Priority
Y=12 Priority for name display
•
(1) 0-1499: Development Table No.
(2) 0 : Name received from the network
is displayed.
1 : Name assigned by CMDB Y=00 is
displayed.
Y=30
•
(1) 1: Single Data Message Frame Format
(2) 0 : with time parameter
1 : without time parameter
– 599 –
CALLER ID CLASS
DATA
This data is effective when
the 2nd data of CM35 Y=59 is
1.
A2594-10