NEC NEAX 2000 Programming Manual page 924

(1/1)
GENERAL DESCRIPTION
This service feature provides for dialed digits to appear on the LCD of a D
STATION APPLICATION
term
All D s
OPERATING PROCEDURE
No manual operation is required. The dialed digits appear automatically on the LCD.
SERVICE CONDITIONS
1. The digits appear on the LCD from the right and move to the left as more digits are dialed. A maxi-
mum of 20 digits can be displayed. When the 21st digit is dialed, the first digit leaves the display from
the far left and the 21st digit appears on the display at the far right. This process continues until all dig-
its have been dialed.
term
2. On the D , digits also appear on the display when implementing SPEED CALLING-ONE TOUCH,
LAST NUMBER CALL and SAVE AND REPEAT features.
Page 142
Revision 1.0
DIAL MONITOR - D
ND-91285-001(E)
DECEMBER, 1999
term
term
.