NEC NEAX 2000 Programming Manual page 505

For Incoming Call Record, do the following programming.
B
Provide the SMDR service for incoming
CM13
calls to the required station.
CM35
Provide the SMDR service for incoming
calls to the required trunk routes.
CM08 Specify whether the SMDR service is ef-
fective only for incoming calls with Account
Code or not.
Specify whether or not the ANI/Caller ID is
sent to SMDR.
When this data is assigned to 1,
NOTE:
SMDR service for incoming calls
is not provided even if CM13
Y=05 is 0 (To provide).
END
DESCRIPTION
STATION MESSAGE DETAIL RECORDING (SMDR)
Y=05
•
(1) X-XXXXXXXX: Station No.
(2) 0 : To provide
1 : Not provided
Y=49
•
(1) 00-63: Trunk Route No.
(2) 0 : To provide
1 : Not provided
(1) 426: SMDR for incoming call
(2) 0 : Effective for all incoming calls
1 : Effective only for incoming calls
with Account Code
(1) 463: ANI/Caller ID to SMDR
(2) 0 : To send
1 : Not sent
– 485 –
PROGRAMMING
Built-in SMDR Programming
DATA
A2477-10