NEC NEAX 2000 Programming Manual page 244

B
CM45
Provide dedicated DTMF Receivers for
DID calls, if required.
Assign the function of each Digital An-
CM49
nouncement Trunk, if needed.
Assign the destination of DID call trans-
CM51
ferred when the station is busy/unas-
signed/no answer.
When Announcement Service is
NOTE:
provided for No Answer (CM51
Y=00) or Busy (CM51 Y=03), see
ANNOUNCEMENT SERVICE.
When Announcement Service is
provided for unassigned (CM51
Y=06), see CALL FORWARD-
ING-INTERCEPT/
ANNOUNCEMENT.
C
DESCRIPTION
page 21
page 92
DIRECT INWARD DIALLING (DID)
Y=1
•
(1) XX Z: DTMF Receiver No.
XX: 00: MP Built-in DTMF Receiver
01-15: 8RST card No. assigned by
Z : 0-3: Circuit No.
(2) 0 : Only for DID
1 : For both DTMF station and Tie
Line/DID
Y=00
•
(1) 000-127: Digital Announcement Trunk
(2) 0D00: Announcement Service when
the called station does not an-
swer the DID/Tie Line call
0800 : Announcement Service when
the DID/Tie Line call terminates
to the busy station
Y=00 No Answer
•
Y=03 Busy
•
Y=06 Unassigned
•
(1) 00-63: Tenant No.
(2) Destination:
X-XXXXXXXX: Station No.
E000: Attendant Console
EB000-EB127: Digital Announcement
– 224 –
DATA
CM10 (E200-E215)
Card No.
Trunk Card No. as-
signed by CM10
NOTE
A2222-10